*MINI* MVari-Stick - BODY UNIT

  • $75.95
  • $39.95

  • Product Code:
MINI MVari Variable Voltage Mod - Body Unit

The MINI MVari is the most value-priced Mod in its class. The MINI MVari is a Variable Voltage E-Cig that allows you to set the voltage output in increments of 0.1V. Go from 3.0V~6.0V with just a few clicks of a switch. Set it to your preferred vaping voltage and puff away.

Please note: Some 18350 will not fit into this unit. The 18350 battery must be 18mm x 35mm in order to fit. Most 18350 batteries are slightly longer than 35mm. Also, we suggest using atomizers or cartomizers of 2.5ohm or higher.

The MINI MVari is packed with Features:
Aluminum body
1- power button
1- voltage up button
1- voltage down button
1- activation button
1- LCD screen, which shows the current voltage the device is set on.
1- 510 threaded connection
1- vented removable end cap w/ spring for battery tension
Uses one High Drain 18350 Battery

Tech Specs:
Selectable voltage from 3.0V~6.0V in 0.1V increments

MINI MVari Body Unit Dimensions: 3-3/4"L x 0.86"D

Power on/Off Button: hold the button down for 5 seconds to turn the device on, hold the button again for 5 seconds to turn the device off.

+ Button: On press, increases voltage by 0.1V increments between 3.0V~6.0V.

- Button:
On press, decreases voltage by 0.1V increments between 3.0V~6.0V.

+ and – Button: Press and hold both buttons for five second to disable the + and – button, locking the device on the voltage it is currently set at.

Regulated output: Keeps the voltage the same with each puff regardless of the remaining battery power. As the battery drains, the device will keep the voltage consistent.

10 Second Cutoff timer: If the activation button is held down for 10 seconds or longer, the MINI MVari will shut itself off until the button is released. To prevent overheating the atomizer and the device.

Short Circuit/Atomizer Protection: The MINI MVari can recognize an atomizer with too low of a resistance for the current voltage setting and will drop the voltage to 3.7V to protect both the battery and atomizer. If the atomizer is too low or shorted out it will shut off power to the device to protect the MINI MVari from being damaged.

Reverse Battery Protection: Protects the device in case you put the battery in the device backwards

Battery Monitoring/Over-Discharge Protection: The device will monitor the battery voltage and automatically turn off when the battery is discharged, preventing damage to the battery by overly depleting it.

Battery Voltage Meter: The MINI MVari has a voltage meter built in, simply press the red power button 6 times and it will display the voltage of the battery for a few seconds. This way you can monitor the power left in the battery before it needs to be recharged. 18350 batteries provide 4.2V at peak charge and over the life of the battery that voltage will decrease to about 3.3V level before needing to be recharged. This will help you monitor the life cycle of the battery. The LCD screen will flash when the battery needs to be recharged, and will stop powering the device.

Amperage Limiting to 2.5 amps: The device should monitor and shut itself off if it detects any excessive over-current conditions.

Vent hole on the bottom of the device for added safety

The MINI MVari body unit will include a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Scratches and discoloration are considered normal wear and tear and is not covered by warranty.

NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers. We only recommend using Lithium Ion rechargeable batteries with a control circuit (protection PCB) to assure safe charge, discharge, etc, use of lithium ion batteries without a protection circuit is potentially hazardous

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

You May Also Like ...

Vision Spinner VV eGo Battery 1300mAh
Price: $24.95
Sale Price: $22.00
Kanger SUBOX Nano Starter Kit - Black
Price: $74.95
Sale Price: $48.95
Uwell Crown Tank - Stainless
Price: $31.00
Sale Price: $22.95
Joye 510 Black Starter Kit
Price: $60.00
Sale Price: $29.95
Innokin iTaste CLK Starter Kit
Price: $49.99
Sale Price: $29.95
SMOKTech XPRO M65 - Silver
Price: $79.95
Sale Price: $29.95
Browse for more products in the same category as this item:
MODS & PVs -> Single Battery