Atomizer head for Aspire Triton - Ni200 OCC - 0.15Ω/ohm

  • Atomizer head for Aspire Triton - Ni200 OCC - 0.15Ω/ohm
  • $4.50
  • $2.95

  • Product Code:
Description
Replacement Atomizer Head for:


These replacement atomizer heads feature pure organic Japanese cotton wicks and 0.15 ohm coils wrapped from pure Nickel (NI-200) wire, allowing you to monitor and limit the temperature your coils are reaching. Because these coils are only for use on temperature sensing devices such as the Evolv"s DNA 40. Get performance and peace of mind, pick up the new temperature sensing OCC coils for your Aspire Triton tank


Patented BVC Technology, 100% organic cotton




Warning:
Risk of battery Explosion! Ni 200 is designed for use only with devices equipped with circuit boards capable of controlling coil temperature, such as DNA 40 Mods. Do not use this product with any other devices.


Warning: This is a sub-ohm resistance atomizer. It should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This atomizer will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.3ohm coil, your mod must be able to fire atomizers of 0.3ohm or lower. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 30 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Tip for new users: We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.



Please Note: This product is not covered by warranty and cannot be exchanged.

You May Also Like ...