Ribon Kanthal Resistance Wire - Sold in a 30 ft spool (approximate length)

High quality wire, perfect wire for rebuilding atomizers! Flat ribbon wire has several advantages over round wire. Ribbon wire has more surface area in contact with the wick. This means more vapor. Another advantage is reduced chance for hot spots.

Wire Specs:

• 0.5mm (width) x 0.1mm (thickness) - 0.635 Ohms/in.

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.


This item is not covered under warranty.

Cartomizers & Tanks
Cartomizers & Tanks -> Rebuildables
Cartomizers & Tanks -> Youde/UD
Accessories
Accessories -> Atomizers
Accessories -> Miscellaneous
Accessories -> Wick, Wire & Tools