IGO-W3 Rebuildable Atomizer

• Drip Atomizer
• Sealed battery connector
• Multiple Holes on casing and drip well for adjustable airflow
• 510 Threaded
• Phillips head screws for positive/negative post
• 4 post for 1-8 Coil configuration
• Rebuild using fiberglass or silica rope and wire
• Stainless steel body and base
• Fits most 510 drip tips
• Wick and wire sold separately

Dimensions: 1-3/16" x 7/8" (length x diameter)


Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.

---

Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.

---

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

Cartomizers & Tanks
Cartomizers & Tanks -> Rebuildables
Cartomizers & Tanks -> Youde/UD
Accessories
Accessories -> Atomizers