Joyetech Cuboid 150W Dual 18650 TC Firmware Upgradeable Mod

Introducing the Joyetech Cuboid, an incredibly small dual 18650 battery TC mod! It is just slightly larger than the Joyetech Evic-VTC single 18650 mod! The Joyetech Cuboid uses the Variable Temperature Control system with firmware V3.0 and 150W output which includes Titanium, Nickel, and Stainless Steel 316 in TC Mode and customized TCR available now.

The Joyetech Cuboid features stainless steel 510 threads and a wide border which matches quite nicely with larger sized tanks. The Joyetech Cuboid is powered by two replaceable 18650 cells with the new slip-open cover. Multiple colors, 0.96-inch OLED screen and the new dual-battery bar display make it more practical and attractive catering to your preference.

Upgradeable firmware ensures that your device is always up to date.

Firmware 3.10 for the Joyetech Cuboid now available which allows you to upgrade to 200W!
http://www.joyetech.com/mvr-software/?sid=171

Please note: The display screen is covered by a protective film.

Features and Specs:

• Dimensions: 3-5/8" x 1-5/8" x 1-1/8"
• Stainless Steel 510 Threads
• Temperature Control: Nickel, Titanium, Stainless Steel 316 and TCR Mode
• Output Wattage: 1-150W
• Temperature Control Range: 100 - 315C / 200 - 600F
• Resistance Range: 0.05-1.5ohm for Variable Temperature Mode
• Resistance Range: 0.1-3.5ohm for Variable Wattage Mode
• Requires (2) 18650 High Amp Batteries (sold separately)
• Upgradable Firmware
• Multi-Colored 0.96-inch OLED Screen
• Dual Battery Display Bar
• New Slip-Open Battery Cover for Simple Battery Changes
• Micro USB Port for Firmware Updates and Charging
• **We recommend an external charger for optimal charging**
• Reverse Battery Polarity Protection
• New Firmware V3.10 for Cuboid Available

Cuboid can be upgraded via VT Software. The new firmware V3.10 for Cuboid, increases maximum output up to 200W.

Cuboid enables you to adjust TCR values for different materials, thus further improving the accuracy of temperature control and bringing you the great taste. There are three options (M1, M2, M3) for you to customize the TCR regarding to the material. In power-off condition, press the fire button and the right regulator simultaneously for around 5 seconds, then you enter into the TCR set menu.

Firmware update now available through official Joyetech website or click here:
http://www.joyetech.com/mvr-software/?sid=171

Please note: Temperature control requires the use of nickel, titanium, stainless wire.

---

The Cuboid will include a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty.

NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.

This device should only be used with rechargeable Lithium Ion IMR batteries with an amp limit of 20A or higher. Using other batteries can be potentially hazardous.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

MODS & PVs
MODS & PVs -> 100W - 200W Devices
MODS & PVs -> Box Mods
MODS & PVs -> Dual Battery
MODS & PVs -> Temperature Control
New Arrivals