Joye eGo ONE VT Variable Temperature Starter Kit

The eGo ONE VT by Joyetech improves upon the original eGo ONE by adding the all-new temperature control function that is rapidly becoming very popular. The eGo One VT brings back the popular form factor while adding a modern twist to eGo style devices. The eGo ONE VT supports VT-Ti (Titanium), VT-Ni (Nickel), and Variable Wattage mode in three different strength levels both in terms of wattage and temperature.

eGo ONE Mega tank caters to your personal needs and preferences. The eGo ONE Mega VT has a large 4.0ml capacity with a dual adjustable airflow control valve. It has three types of heating wires: CL (Kanthal), Ti (Titanium) and Ni (Nickel 200), respectively supporting VW (Variable Wattage)/ VT-Ti (Titanium)/ VT-Ni (Nickel) modes.

Filled from the bottom: Unscrew the base and fill tank while avoiding the metal airflow tube in the center.

eGo ONE VT Battery

• Dimensions: 3-3/8"L x 7/8"D
• 510 Threaded
• 22mm Diameter
• 2300 mAh Battery
• Nickel and Titanium Temperature Control Mode/Wattage Mode
• Resistance: 0.2 ohm - 1.0 ohm (Temperature Control Mode)
• Resistance: 0.4 ohm - 3.5 ohm (Variable Wattage Mode)
• Low voltage protection
• Short circuit protection
• Atomizer protection
• No Atomizer alert
• Battery Indicator Light

eGo ONE Mega VT Tank

• Dimensions: 2-1/2"L x 7/8"D (including drip tip and threads)
• 510 Threaded
• 4.0ml Capacity Tank
• 22mm Diameter
• Adjustable airflow control valve
• 1.0 ohm Kanthal CL Atomizer Head
• 0.2 ohm Ni200 CL-Ni (Nickel) Atomizer Head
• 0.4 ohm Ti CL-Ti (Titanium) Atomizer Head

Compatible Coils:

• CLR
• CL
• CL-Ti
• CL-Ni

---

Warning:
Risk of battery Explosion! Ni 200 and Titanium (Ti) is designed for use only with devices equipped with circuit boards capable of controlling coil temperature, such as DNA 40 Mods. Do not use this product with any other devices.

Warning: This tank uses sub-ohm resistance coils. This tank should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 30 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Tip for new users: We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.



myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

MODS & PVs
MODS & PVs -> Built-In Battery
MODS & PVs -> eGo Series
New Arrivals