Joyetech eVic-VT 60W 5000mAh Temperature Control Mod
Starter Kit

Joyetech enters the temperature control market with the eVic-VT. Presenting the eVic-VT 60W, its new cutting edge technology of temperature control. The eVic-VT can fire up to 60 watts perfect for people chasing that perfect taste and vapor production. The eVic-VT is a sleek looking device that is sure to stand out among the crowd with it's eye catching and colorful design.

The Joytech eVic-VT features a super large OLED screen, supporting VT-Ti (Titanium)/ VT-Ni (Nickel)/ VW mode, and huge battery capacity of 5000mah.

The Variable Temperature (VT) system provides an almost perfect vaping experience with various e-juice through the temperature control system, and at the same time, it decreases e-juice consumption. Also, it is economical in battery consumption. When vaping, the wattage will reach to maximum in no time and the device can easily sustain in high temperature but with much lower wattage. The Variable Temperature setting allows to use Nickel, Titanium or Kanthal Wire.

In Variable Wattage (VW) mode output wattage can be adjusted from 1W to 60W by turning the control knob, right to increase, and left to decrease. Holding the control knob to the right or left will make the wattage setting rapidly increase or decrease.

The eGo One Mega VT atomizer has a large 4ml capacity which is vividly designed to pair up with your eVic-VT. The eGo One Mega VT has two types of heating wires: Ti (Titanium) and Ni (Nickel 200), respectively supporting VT-Ti (Titanium)/ VT-Ni (Nickel) modes. It has a metal thermal insulation drip tip designed for a comfortable and easy vape. Airflow may also be adjusted to meet your own preferences and vapor production.


Features and Specs for the eGo One Mega VT:

eGo ONE Mega VT—Ni (Nickel 200,made in USA)

• Diameter: 0.25mm
• Resistance: 0.2Ω
• Component: Organic Cotton
• Temperature recommended: 500-550˚F
• Summit wattage: 60W

eGo ONE Mega VT—Ti (Titanium)

• Diameter: 0.4mm
• Resistance: 0.4Ω
• Component: Organic Cotton
• Temperature recommended: 450-500˚F
• Summit wattage: 60W

Note:
For Kanthal wire with resistance range 0.25-1.0 ohm, the maximum output wattage on screen is 60W.
For Kanthal Wire with resistance range 0.15-0.24 ohm, the actual maximum output wattage will be limited to be 50-55W to ensure safer operation.


Features and Specs:

• Dimensions: 3-1/4"L x 1-7/8"W x 1"D (eVic-VT battery)
• Capacity: Built in 5000mAh battery
• 510 threaded
• Output mode: VT-Ti/VT-Ni/VW Mode
• Temperature Range: 100-315 Celsius /200-600 Fahrenheit
• Operating Wattage: 1 to 60 Watts
• Output Voltage: 0.5V-8.0V
• Resistance Range: 0.05-1.0ohm for VT mode
• Resistance Range: 0.15-3.5ohm for VW mode
• Charged via USB
• 4ml Capacity
• 510 drip tip compatible

eVic-VT Visual Display:

• VT-Ti mode/VT-Ni mode/VW
• Wattage/Voltage
• Atomizer Resistance
• Battery power/Puff/Time

Please note: Temperature control requires the use of nickel or titanium wire coils.


The eVic-VT will include a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty.

NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.

Warning: This tank uses sub-ohm resistance coils. This tank should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.3ohm coil, your mod must be able to fire atomizers of 0.3ohm or lower. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 30 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Tip for new users: We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.


myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

MODS & PVs
MODS & PVs -> 30W - 80W Devices
MODS & PVs -> Box Mods
MODS & PVs -> Built-In Battery
MODS & PVs -> Temperature Control
New Arrivals