Joye Delta II LVC-Ni Nickel Atomizer Head - 0.3ohm

$4.55
$3.85

Product Code:

Qty

Description

Joye Delta II LVC-Ni Nickel Atomizer Head Designed for use with temperature control mods
Resistance: 0.3 ohm

LVC-Ni (Nickel 200)
Diameter of Ni: 0.25mm
Resistance: 0.3Ω
Temperature recommended: 500-550˚F
Summit wattage: 60W

Replacement Coil/Atomizer head for the Joye Delta II

The Delta II LVC-Ni Coils are made for the Delta II ONLY! It features liquid control so you can control how much can get to your coil.

Delta II LVC (Liquid Valve Control) atomizer head, with 0.3ohm resistance, can create huge cloud production. Rotate the ring on the head base clockwise or counterclockwise, you can adjust the liquid valve.

Warning:
Risk of battery Explosion! Ni 200 is designed for use only with devices equipped with circuit boards capable of controlling coil temperature, such as DNA 40 Mods. Do not use this product with any other devices.

Warning: This is a sub-ohm resistance atomizer. It should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This atomizer will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.3ohm coil, your mod must be able to fire atomizers of 0.3ohm or lower. You must be also ensure that your batteries can handle sub ohm atomizers and coils. If you're using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 30 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Tip for new users: We strongly suggest 6mg eLiquid or lower with this atomizer. Sub-ohm atomizers produce higher throat hit than low and standard resistance atomizers. Using this atomizer with a nicotine level above 6mg will usually taste burnt or harsh.

This product is not covered by warranty