Kanger MT3S

  • $7.10
  • $5.99

  • Product Code:
Description
The MT3S is a bottom coil Clearomizer tank system by Kanger. It features replaceable atomizer heads and has a eLiquid capacity of about 3ml.

Bottom coil cartomizers provide a nice warm vapor, with a superb clean flavor, and reduced wicking issues.

Unlike other Clearomizers, the mouthpiece of the MT3S is permanently attached and it is filled from the bottom. This three-piece design is a major advantage over other tanks with replaceable atomizer heads. If the MT3S atomizer head fails unexpectedly and the tank is filled with eLiquid, the atomizer head (base) can be easily replaced without the need to drain the eLiquid in the tank first.


To fill the MT3S unscrew the bottom atomizer head. Hold the tank upside down and fill with 2.4 ml- 3 ml of eLiquid. With the tank mouthpiece-end down, screw the atomizer head back on.

Click here for illustrated instructions on How-to fill a Kanger T3/MT3

Quick Links:
Replacement Coils
Replacement Coils


Important Note:
This Clearomizer is designed to fasten onto the outer cone threads of an Ego battery. It is NOT 510 threaded.

This Clearomizer is compatible with Ego series batteries such as the Joye Ego-Tank, Joye Ego-C, Joye Ego-C Twist and Vision Spinner battery.

To use with a 510 threaded MOD like the Zmax (seen in image below), iTaste SVD, Smoktech SID, Joye eVic etc... you will need a 510 to Ego Adapter. Even if your MOD has Ego threads, they may or may not be deep enough to make contact. We strongly suggest purchasing the adapter if you intend to use this Clearomizer with a MOD.







Tips:
  • The metal tube in the center of this Clearomizer leads from the mouthpiece to the battery end. Avoid getting liquid in this tube when filling the Clearomizer.

  • When unfastening the base (atomizer head) to refill the Clearomizer, the seals are temporarily broken and liquid will leak from the mouthpiece or escape into the center tube. Always wrap a cloth or piece of tissue around the mouthpiece when unfastening the base of the Clearomizer.

  • Gurgling noise or leaks: This is a sign that liquid has found its way into the metal tube in the center of the Clearomizer (and usually occurs after a refill). Ridding the center tube of liquid will resolve the issue. To do so without emptying the tank, remove the Clearomizer from the battery, wrap a cloth or tissue around the battery end of the Clearomizer and blow through the mouthpiece.

  • It is normal to find a small amount of liquid in the battery contact area when removing the Clearomizer or any atomizer. We recommend cleaning the battery before charging it.

  • When possible, keep the tank full and never below 1/3 full of eLiquid ("topped off"). This helps maintain the "vacuum" in the tank and prevent leaks.

  • Atomizer heads have an average lifespan between 10 to 20 days. When the atomizer head wears down, it may begin to leak. Replace the atomizer head with a new one if available.




Please Note: This product is not covered by warranty and cannot be exchanged.

You May Also Like ...

Sigelei FUCHAI 200W TC Mod - Black
Price: $75.95
Sale Price: $59.95
Kanthal Microcoil - Pack of 10 - 1.0ohm
Price: $4.50
Sale Price: $3.99
HCigar VT40 Evolv DNA40 Mod - Blue
Price: $159.95
Sale Price: $109.00
Efest XSmart Single USB Charger
Price: $9.93
Sale Price: $8.99
iPV Mini II - 70W - Silver
Price: $89.95
Sale Price: $58.95
Bellus RTA
Price: $35.95
Sale Price: $24.95
G2 Vapor - Dr. Green
Price: $11.95
Joye eVic-VT 60W - Starter Kit
Price: $124.95
Sale Price: $55.95
Jelly by Twonk Juice
Price: $20.00
Browse for more products in the same category as this item:
Cartomizers & Tanks
Cartomizers & Tanks -> eGo Tanks
Cartomizers & Tanks -> Kangertech