Twisted Kanthal Wire

$13.50
$5.75

Product Code:

Qty

Description

Twisted Kanthal Resistance Wire - Sold in spools

By twisting the wire, the resistance of the coil is reduced but still maintain the high coverage on the wick. Great for building your custom RBA/RDA twisted wire coils, it's all about increasing the surface area to give off more vapour. High quality wire, perfect wire for rebuilding atomizers!

Wire Info:

26 AWG x 5m (long) Double Twisted - 0.4mm D (2 wires)
28 AWG x 10m (long) Double Twisted - 0.3mm D (2 wires)
30 AWG x 10m (long) Double Twisted - 0.25mm D (2 wires)
32 AWG x 10m (long) Double Twisted - 0.2mm D (2 wires)
28 AWG x 5m (long) Triple Twisted - 0.3mm*3 D (3 wires)
30 AWG x 5m (long) Quadruple Twisted - 0.25mm*4 D (4 wires)
28ga X 3 Triple Braided Wire- 15ft

Important Note:
Rebuildable atomizer coils and wicks have known risks.

Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.

This is because:

1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it is entirely the risk of the user.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.

This item is not covered under warranty.