Features:

• Variable voltage: Adjust the voltage output from 3.0 to 6.0 volts in 0.1 volt increments.
• Variable wattage: Set the preferred wattage (from 3 to 15 watts) and the VAMO V2 will adjust the voltage automatically no matter what atomizer you use.
• RMS Out: RMS provides a more accurate voltage output.
• 510 Threaded: Compatible with 510 atomizers, cartomizers, Vision Ego Clearomizer 2.0, eGo CE4 PLUS V2, Vision Vivi Nova Tanks, Smoktech DCTank and Kanger Clearomizer
• Can be used with single 18650, single 18350 or two 18350 (flat top). This device is not compatible with protected batteries.
• Atomizer resistance check
• Battery power check

Dimensions:

• 18650 mode: 5-1/2"L x 7/8"D
• 18350 mode: 4-1/4"L x 7/8"D

• Cutoff Timer: When you press the power button to use the device for 10-15 seconds or more, the device will turn off automatically.
• When a single batteries voltage is less than 3.2v or dual 18350 batteries voltage is less than 6.4v, the screen will display LO v, which indicates that the batteries need to be recharged.
• Atomizers at 1.2ohm or less, the screen will display LO Ω, which indicates that you need to use a new atomizer at higher resistance.
• Atomizer short circuit the screen will display LO v.
• Incorrect battery installation protection. The device will not work circuits will be protected.
• Max current 5A
• Minimum resistance 1.2 Ω
• Thermal Monitoring
• Correct Polarity Signaling
• Heavy Duty Micro-switches
• Vent Hole in Battery End Cap
• Battery End Cap ‘fail safe’ designed to ‘give way’

The VAMO V3 will include a 30 day Limited Warranty against any manufacturing defects from the date of delivery. Scratches and discoloration from regular use is considered normal wear and tear and is not covered by warranty.

NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers.

This device should only be used with rechargeable Lithium Ion IMR batteries with an amp limit of 20A or higher. Using other batteries can be potentially hazardous.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

MODS & PVs
MODS & PVs -> 3W - 20W Devices
MODS & PVs -> Single Battery