Approx. dimensions: 4.45 in. x 0.66 in.

Vapros by Visiontech

This is the highest capacity variable voltage eGo available today! Vape at your desired voltage! Higher voltage = More vapor! The Vision Spinner is compact making it the most portable variable voltage device available. Don't forget the high capacity battery cell... Vape for hours on a single charge!*

The Spinner has a dial located at the base of the battery. The Spinner has four markings to indicate approximate output voltages at 3.3, 3.8, 4.3, and 4.8 volts but is adjustable throughout the entire voltage range. Simply turn the dial to your desired vaping voltage. It features an easy to read numbered dial.

---

Newer versions of the Vision Spinner battery require one button push to activate the charge. To charge: Fasten the Spinner battery to a Joye Ego Rapid Charger (sold separately), if the battery button does not flash and the charger light does not turn red, activate the charge by pushing the battery button once. The button light should now flash and the charger light should turn red to indicate that a charge is in progress. The charger light will turn green when the charge is complete.

---

*Please Note: Results may vary. Using the battery at a higher voltage output will drain the battery quicker than when using it at a lower voltage. Standard Joye eGo series batteries output a regulated voltage of approximately 3.2v.

Tech Specs:

510 Threaded: Compatible with all of our Joye eGo Series atomizers and cartomizers, 510 Series atomizers and cartomizers. Charge this battery using a Joye eGo Rapid USB Charger.

Variable Voltage Output: Voltage can be adjusted from 3.2V~4.8V

Short Circuit Protection: When a short is detected, the battery will shutdown until the short is removed.

Lockable: Press the button 5 times within 1.5 seconds to lock or unlock the battery. The battery LED will blink when switching modes. When the battery is in lock mode, the button is disabled and the battery will not power an atomizer or cartomizer.

Atomizer Protection/Cutoff Timer: If the button is depressed for 10 seconds, the battery will shutoff until the button is released.

Battery Monitoring/Over-Discharge Protection: The device will monitor the battery voltage and automatically turn off when the battery is discharged, preventing damage to the battery by overly depleting it. The LED will blink 5 times indicating that a charge is need.






NOTE: Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers. We only recommend using Lithium Ion rechargeable batteries with a control circuit (protection PCB) to assure safe charge, discharge, etc, use of lithium ion batteries without a protection circuit is potentially hazardous

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a LI-ION battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

MODS & PVs
MODS & PVs -> Built-In Battery
MODS & PVs -> eGo Series
Accessories
Accessories -> Batteries